7. How to mount your doorbell camera
Make sure there is no power going to the doorbell before starting the installation process
Rob
Last Update 3 years ago
1. Remove your existing doorbell (make sure no wires slip back into the wall)
2. Attach the doorbell mounting bracket onto the wall
• Feed the wires through the hole in the bracket. Fix the bracket firmly to the wall using the screws provided (make sure the bracket is flush to the wall)
3. Connect the power wires to the bracket
• Loosen the terminal screws and insert the wires beneath the screws (do not touch the wires together)
4. Attach the doorbell to the bracket on the wall.
Slide the doorbell down onto the mounting bracket and push the doorbell towards the wall. Tighten the screw on the bottom of the doorbell.
5. Turn back on the power going to the doorbell (the LED on the doorbell will light up and will then start to flash green and red indicating it is ready to sync with your alarm.com app)
