1. How to install your gokonnect security system

Pick a good location for your IQ panel, we recommend an area that receives good Wi-Fi connection and that is not too far from your front door.

Note: The IQ panel should already be plugged in you may not have to remove the back panel.

1. Take your IQ panel out of the box

2. Remove the back panel and plug in the power cable

3. Place the back panel back on

4. Insert the table stand into the holes at the back

5. Plug in your IQ panel and turn it on (press the button on the right-hand side for 3 seconds)

6. Wait for the IQ panel to boot up

7. You are now ready to start mounting your sensors

Before starting the next step, you should log into the alarm.com app, the login details are on your start up sheet that is provided with the kit.