Changing the battery in your siren
Wireless Outdoor Bell Box (BX-32 / BX-32-F1)
Rob
Last Update 3 years ago
• Release the cover-fixing screw at the bottom of Bellbox using a Philips screwdriver and pull the outer case out carefully.
• Slide battery switch to the off position.
• The battery compartment is a large box in the Bellbox with a lid secured by 2 screws. Release the screws using a Philips screwdriver and take off the compartment lid.
• Remove the old batteries and press the Tamper Switch a couple times to discharge.
• Insert new batteries into the battery compartment.
• After inserting batteries, slide the battery switch to ON position. All LEDs will flash once and the buzzer will emit 1 beep as the Bellbox powers on. Replace and secure the battery compartment lid, with 2 screws using a Philips screwdriver.
• Replace and secure the Top cover by tightening the bottom screw using a Philips screwdriver
